The combined functioning of geoelectricity and metal detection makes this treasure hunting detector specially interesting for all archaeologists, cavity seekers and treasure hunters searching for tomb treasures or valuable antique objects inside tombs and graves or buried precious materials.

The treasure hunting metal detector Rover C II can be used for the following purposes:

The treasure hunting 3d metal detector Rover C II can be used inside old buildings or ruins to look for buried materials or voids underground as well as inside churches to look for crypts or hidden chambers, hallways or tunnels.

Due to the Rover C II a 3d ground mapping is possible to visualize the scanned terrain and its buried metals or voids. In the software Visualizer 3D the treasure hunter or archeologist is able to find out position, size and depth of located items.
 

Here are some examples of objects and structures which can be detected with the treasure hunting metal detector Rover C II:

As a combination of two devices the metal and cave detector Rover C II offers a graphical ground scan and a geo-electrical measurement. When using the geoelectrical measurement you can define a rectangular scan area by placing 4 electrodes inside the ground. By measuring the ground resistance and its variations it is possible to locate specially voids like empty rooms, tunnels or bunkers in high depths.
 

Besides the standard probe for 3d ground scanning there is additionally the high resolution Super Sensor connectable. In combination with the professional software Visualizer 3D there are graphical measurements in high resolution possible, which offer valuable clues to the depth and size of located objects. The Super Sensor is specialized to locate precious metals in high depth. It can find metal targets deeper than the standard probe. By using the Super Sensor and the Visualizer 3D software it is also possible to distinguish between ferrous and non-ferrous metals. This is specially important for treasure hunting. So treasure hunters can learn if there can be a treasure situated at this position or just an iron target and can decide if it is profitable to start digging at this place or not.

The treasure hunting metal detector Rover C II includes the following functionality:

Because of the integrated microprocessor technology ground balance, depth measurement and data storage will be performed automatically by the device. The evaluation of the measured data takes place at the computer where the scanned area can be analysed in a three-dimensional graphic with the help of the software Visualizer 3D.

The working with the Rover C II cave and metal detector is easy and can be learned in a short time. Also hobby treasure hunters and metal detectorists can use the device without any difficulties. There is now a mini laptop delivered for free with every purchase of the treasure hunting metal detector Rover C II, where the 3d software and bluetooth technology is already installed. The device comes ready to go in the field and start metal detecting for treasures right away.

This powerful metal detector package with the minimum of weight and small baggage is the optimal equipment for outdoor treasure hunting needs.

The 3d metal detectors of the Rover Series are not only simple metal detectors with audio output. Furthermore it is possible to create excellent three-dimensional graphics of the scanned underground. Due to the approved Single-Sensor-Technology those detectors are optimally applicable for detecting hidden objects.

With immediate effect every detector from the Rover Series will be shipped with a free of charge mini laptop. The Visualizer 3D software is already installed, so you don't have to waste time - everything is ready to go!

• General description
• Testimonials
• Technical specification
• Scope of delivery

Control unit of the metal detector Rover C II with standard probe. Lightweight and easy to use metal detector Rover C II. Purchase a Rover C II and get this mini laptop for free! Metal detecting and treasure hunting with Rover C II, standard probe and free preconfigured mini laptop. Cave detector Rover C II with connected geoelectrical electrodes for cavity detection. Treasure hunting metal detector Rover C II with connected Super Sensor.

The grave and tomb detector Rover C II is on the top of all Rover Series products in regard of functionality and performance. It is a combined detector including the features of the metal detector Rover C and the geoelectrical detector Cavefinder. So it cannot only be used to search for buried metals like treasures or boxes, it can also be used to find hidden rooms, graves, tombs or other underground cavities. The redesigned 'New Edition' of Rover C II includes the following special features: display backlight for search at night (on/off switchable) built-in LED spotlights to light up the soil surface in the dark (on/off switchable) integrated auto reversal electronics to facilitate ground scanning process doubled recording speed for rapid scanning on-site simplified and optimized menu navigation and handling for starters and professionals with improved scan results reduced weight and small size of main unit for comfortable long-term use new lightweight small external Power Pack for longer working time and fast recharging desert tan colored casing to prevent damages/overheating caused by insolation wireless stereo headphones for noiseless metal detection surround sound delivered with shock protective, waterproof Peli transportation case incl. wheels and extendable handle for easy transportation The combined functioning of geoelectricity and metal detection makes this treasure hunting detector specially interesting for all archaeologists, cavity seekers and treasure hunters searching for tomb treasures or valuable antique objects inside tombs and graves or buried precious materials. The treasure hunting metal detector Rover C II can be used for the following purposes: general cavity detection tomb detection cemetary surveys or grave site investigations localisation of grave chambers and included metallic objects treasure hunting (research of buried treasures like boxes, chests, vases) metal detection (gold, silver, ferrous metals, precious metals) detection of sepulchral tumulus and barrow, Egyptian tombs, historical grave chambers localisation of sarcophagus, reliquary caskets, crypts, treasure chambers, quest of the Grail 3d ground mapping The treasure hunting 3d metal detector Rover C II can be used inside old buildings or ruins to look for buried materials or voids underground as well as inside churches to look for crypts or hidden chambers, hallways or tunnels. Due to the Rover C II a 3d ground mapping is possible to visualize the scanned terrain and its buried metals or voids. In the software Visualizer 3D the treasure hunter or archeologist is able to find out position, size and depth of located items. A gravesite in Malaysia, which can be surveyed with Rover C II. Graphical representation of a detected grave with Super Sensor Here are some examples of objects and structures which can be detected with the treasure hunting metal detector Rover C II: boxes and chests gold and silver objects grave chambers, sarcophaguses and tombs bunkers, galleries, caves and tunnels As a combination of two devices the metal and cave detector Rover C II offers a graphical ground scan and a geo-electrical measurement. When using the geoelectrical measurement you can define a rectangular scan area by placing 4 electrodes inside the ground. By measuring the ground resistance and its variations it is possible to locate specially voids like empty rooms, tunnels or bunkers in high depths. Find out how deep other customers found buried objects and cavities under the surface with the technology of FS-Future Series®! View depth table ... Besides the standard probe for 3d ground scanning there is additionally the high resolution Super Sensor connectable. In combination with the professional software Visualizer 3D there are graphical measurements in high resolution possible, which offer valuable clues to the depth and size of located objects. The Super Sensor is specialized to locate precious metals in high depth. It can find metal targets deeper than the standard probe. By using the Super Sensor and the Visualizer 3D software it is also possible to distinguish between ferrous and non-ferrous metals. This is specially important for treasure hunting. So treasure hunters can learn if there can be a treasure situated at this position or just an iron target and can decide if it is profitable to start digging at this place or not. The treasure hunting metal detector Rover C II includes the following functionality: Acoustical magnetometer Graphical ground scans (manual/automatic) with standard probe and high resolution Super Sensor probe 3d scans in memory or direct data transfer to pc (via Bluetooth) geoelectrical measurement discrimination of ferrous and non-ferrous metals with Super Sensor Because of the integrated microprocessor technology ground balance, depth measurement and data storage will be performed automatically by the device. The evaluation of the measured data takes place at the computer where the scanned area can be analysed in a three-dimensional graphic with the help of the software Visualizer 3D. The working with the Rover C II cave and metal detector is easy and can be learned in a short time. Also hobby treasure hunters and metal detectorists can use the device without any difficulties. There is now a mini laptop delivered for free with every purchase of the treasure hunting metal detector Rover C II, where the 3d software and bluetooth technology is already installed. The device comes ready to go in the field and start metal detecting for treasures right away. This powerful metal detector package with the minimum of weight and small baggage is the optimal equipment for outdoor treasure hunting needs. Additional Downloads User's Manual (english) Filesize: 2.68 MB Benutzerhandbuch (deutsch) Filesize: 2.71 MB

 

Here we present you some discoveries, which has been located with this geophysical metal detecting instrument. If you also made a discovery or know somebody who made a fantastic finding with our metal detectors, just write us an email or use our online form!

Hidden tomb discovered under church

An amateur actress uncovered the entrance to a 500-year-old secret chamber, which had been hidden for centuries, when she accidentally stamped her shoe through one of the floor tiles at St. Mary's Church, in Redgrave, Suffolk. Just weeks before, a geophysicist had used state-of-the-art ground scan detectors (eXp 4000, Rover C II) to locate the long-forgotten vault. There was just one last thing to do ... finding the entrance.

>> Read more about this metal detector find!

Rover C II detects a goat statue made of copper and gold in Iran

End of 2008 some customers from the Middle East area located a small statue made of copper, zinc and gold, showing two goats. This ancient treasure find has been detected during archaeological surveys with metal detector Rover C II in about 1.40 meters depth under a stone with cryptical signs.

>> Read more about this metal detector find!

The following technical indications are medial values. During operation small variations are quite possible.

Control unit

Data transmission (Bluetooth)

Computer, minimum requirements

The computer is not part of the scope of delivery. The indicated values should help you for a correct selection of a suitable computer for analysis of your measured results.

Jeohunter 3D Dual System is a detector system which is produced with the cutting-edge technology and is capable of performing the most advanced metal and cavity detection in the world. Jeohunter 3D Dual System which is classified as deep detector inspects the metal targets detected under the ground in four groups as Gold, Non-ferrous, Ferrous and Steel. Besides its success in metal detection and evaluation, thanks to its cavity detection feature, it notifies its user about the structures like graves, cellars, tunnels and caves in real time during the searching. Jeohunter 3D Dual System which enables drawing the 3D signal graphics of the targets detected under the ground in real time is the most advanced one among the video systems.

With its multi function searching and detection features Jeohunter 3D Dual System, ensures its users to search and investigate in very dense and mineral environments on the stiffest surface structures. The main features which separate it from other detectors are a special interface design offering an easy usage to amateur and professional users and practical searching screen.

Having a unique deepness and perfect metal discrimination, this system is capable of very sensitively delivering target signal deepness value. Jeohunter 3D dual system informs the user about the deepness of the target under the ground in terms of "cm", whether the target is a metal or a cavity, is large or small.

Jeohunter 3D Dual System responds to your all searching and investigating needs in the field with its three different searchcoils. You will enjoy the comfort of having 3 detectors at the same time as you purchase Jeohunter 3D Dual System. . You will experience the excitement of searching in the deep areas for old metals which have not been explored by anyone before with Deep Searchcoil which is active up to 12 meters depth and has a dimension of 60 x 100 cm; General Searchcoil which is effective up to 4 meters and has a dimension of 36 x 44 cm; Surface Searchcoil which is active up to 4 meters and has a dimension of 21 x 31.5 cm.

SIGNAL-SHAPE INTERACTION

Jeosystem products (jeohunter, jeoscan) are equipped with the latest technology. The osciloscope utility on the display screen transforms the target signals it receives from the ground into real time graphics, thus it provides information to the user about the shape of the target. With this feature, the user may understand the shape of the target without excavation.

By means of the software which is capable of establishing signal-shape relation, Jeosystem has a very important privilege which is not present in other detectors.  You will find all the information you expect from a detector and more of that, in our Jeosystem series detectors. Technology is waiting for you.

You can easily scan and detect the targets in wide and deep fields with Deep searchcoil which has a dimension of 100 x 60 cm and which is specially designed for deeper areas. Deep Searchcoil which has a very comfortable and practical usage is produced for you to get perfect results even in ground structures with the richest minerals without wasting time with ferrous metal wastes like bottle caps and nails.

Its outstanding metal discrimination capability is the most important point which separates it from other big searchcoils. You will detect the cavities as well as the metals with its Deep Searchcoil which seperates the metals in four groups as Gold, Non-ferrous, Ferrous and Steel and which deliver the percentage information of the metals which are together.  You can visually detect the targets which you will not be able to detect with other devices, such as, cellars, tunnels and caves, with its unique 3D feature.

JEOHUNTER LED SYSTEM

Jeohunter 3D Dual System has a perfect 3D system and a very practical LED system. With the LED system you will be able to conduct fast and efficient searches in areas where you cannot do research with big and general searchcoil, such as walls and hillside searches as well as single many and surface searches.  Cavity signals are on the left side and metal signals are on the right side of the LED panel which is on the top of the armrest.  In addition to the light warning system, it enables the user to detect easily in all conditions with its two different audio tones for cavity and metal targets.

22 Probe geophysical :

4 Probe geophysical:

Magnetometer survey :

Metal detector :

The EXAMINER metal detector uses the "transmit / receive" coils technology
like on all metal detecting systems, but the signal procession is been
carried out on the computer software.
This way the weakest signals produced by the detector coils
are amplified by the computer and presented as colourful graphics.
Deep targets have very low signal responses that are missed by the
limited performance of the detector circuits.
Targets that would be missed with an ordinary metal detector either because
the signal was weak or even not heard at all, are indicated clearly by the EXAMINER.
It is so sensitive, that even geological features like voids and man made structures,
may be visualized at some degree.

With the discrimination control set to a certain level the metal detector
produces various color tones to differentiate between the rejected
and the accepted targets.
The graph displays information of all metal targets, and the user can view
the unwanted targets, iron, foil, in blue and precious metals
(like gold for example) in red.

Underground images in real time:

Choose the graphics you want before or while you investigate:

3 high resolution graphic types offered to select from.



Grid blocks are colored according the data variations,
has a target depth calculator and co-ordinate indication, this way you see exactly where the target is
and you can pinpoint it again at your next visit.


2D CONTOUR:



The high resolution graph - that smoothes out the targets shapes outlining their properties, colourful and detailed.



3D: The highest resolution ever rotatable graph - select the area part you want,
or just click on 3D to see the whole 3D view of underground
that is automatically rotatable to investigate target shapes from any viewing angle, from 0 to 360 degrees. Numerous features for all graphic types assist to target analysis.

World war II bunker found by one of our customers using the EXAMINER magnetometer



A magnetometer survey in 3D.
Displays the front side of a bunker and it's entrance as a small red "extension". Depth of the found: 2.5 m.
Scattered at the front area are small metal fragments, that are easily recognised compared to the solid and vast view of the bunker.

The SWEEP LINES co-ordinates are the lines the user walked, while the POINTS are the steps.
Total 14 sweep lines with 14 steps on each for this survey.
EXAMINER displays with the graph these co-ordinates to pinpoint the target accurately.
The user knows this way which of his steps and sweep lines cover the target.

The graph has a 310 degree viewing angle while it can be rotated to a full 0 - 360 degrees view.

At left the colour to data scale according to the acquired soil data.
Note that there is a great variation between the soil data (blue) and the target (red)

Metal box in 3D scan by GEO EXAMINER in 4 probe mode




Tombs in 3D scan by GEO EXAMINER 22 probe mode

Select the best sweep direction:

2 Data collection modes manual and auto:

New "replay" function assures that no target is left behind:

• Specifications

• 3 integrated systems

• Frequency range

• Computer controlled data collection

• Data Points

• Data point density

• Depth of localization

• Resolution

• Ambient temperature

• Data processing

• Standard equipment

The EXAMINER computer

Specifications of the EXAMINER computer

The EXAMINER interface

Specifications of the interface

The GEO EXAMINER itself is a portable 9" touch screen computer.
Ét has no buttons, switches or adjustments, to operate it simply use the stylus pen
or your finger tip on the TFT lcd.

GEO EXAMINER has 3 integrated systems for the price of one:

:

22 Probe geophysical :

4 Probe geophysical:

Magnetometer survey :

Metal detector :

The EXAMINER metal detector uses the "transmit / receive" coils technology
like on all metal detecting systems, but the signal procession is been
carried out on the computer software.
This way the weakest signals produced by the detector coils
are amplified by the computer and presented as colourful graphics.
Deep targets have very low signal responses that are missed by the
limited performance of the detector circuits.
Targets that would be missed with an ordinary metal detector either because
the signal was weak or even not heard at all, are indicated clearly by the EXAMINER.
It is so sensitive, that even geological features like voids and man made structures,
may be visualized at some degree.

With the discrimination control set to a certain level the metal detector
produces various color tones to differentiate between the rejected
and the accepted targets.
The graph displays information of all metal targets, and the user can view
the unwanted targets, iron, foil, in blue and precious metals
(like gold for example) in red.

Underground images in real time:

Choose the graphics you want before or while you investigate:

3 high resolution graphic types offered to select from.



Grid blocks are colored according the data variations,
has a target depth calculator and co-ordinate indication, this way you see exactly where the target is
and you can pinpoint it again at your next visit.


2D CONTOUR:



The high resolution graph - that smoothes out the targets shapes outlining their properties, colourful and detailed.



3D: The highest resolution ever rotatable graph - select the area part you want,
or just click on 3D to see the whole 3D view of underground
that is automatically rotatable to investigate target shapes from any viewing angle, from 0 to 360 degrees. Numerous features for all graphic types assist to target analysis.

World war II bunker found by one of our customers using the EXAMINER magnetometer



A magnetometer survey in 3D.
Displays the front side of a bunker and it's entrance as a small red "extension". Depth of the found: 2.5 m.
Scattered at the front area are small metal fragments, that are easily recognised compared to the solid and vast view of the bunker.

The SWEEP LINES co-ordinates are the lines the user walked, while the POINTS are the steps.
Total 14 sweep lines with 14 steps on each for this survey.
EXAMINER displays with the graph these co-ordinates to pinpoint the target accurately.
The user knows this way which of his steps and sweep lines cover the target.

The graph has a 310 degree viewing angle while it can be rotated to a full 0 - 360 degrees view.

At left the colour to data scale according to the acquired soil data.
Note that there is a great variation between the soil data (blue) and the target (red)

Metal box in 3D scan by GEO EXAMINER in 4 probe mode




Tombs in 3D scan by GEO EXAMINER 22 probe mode

Select the best sweep direction:

2 Data collection modes manual and auto:

New "replay" function assures that no target is left behind:

• Specifications

• 3 integrated systems

• Frequency range

• Computer controlled data collection

• Data Points

• Data point density

• Depth of localization

• Resolution

• Ambient temperature

• Data processing

• Standard equipment

The EXAMINER computer

Specifications of the EXAMINER computer

The EXAMINER interface

Specifications of the interface

Renowned Target Separation

• Best Ergonomics in the Industry
• Intuitive User Interface
• Menu-Driven User Interface
• Trigger Actuated Target Pinpointing
• Double Filter Discrimination Modes for Searching in Trashy Areas
• Trigger Actuated FASTGRAB™ Instant Ground Cancellation
• Super Sensitive - Detect Coins to 15 Inches and more
• Ground Mineralization Bar Graph Readout
• Waterproof 11-Inch Open Frame Bi-Axial Search Coil
• Great for Highly Mineralized Soils
• Read Field Test

Teknetics T2

The Teknetics T² is a high performance multi purpose professional metal detector. It utilizes the latest advances in electronic technology, and its functional design represents the leading edge of engineering.

The T² is easier to learn than other comparable metal detectors. Its combination of light weight and balance provides comfort unmatched by any other detector in its price range. Its most popular uses include coin shooting, relic hunting, and gold prospecting.

In A Class By Itself

• Large LCD Screen with Target Identification Display
• Intuitive User Interface
• Menu-Driven User Interface
• Menu Always Visible
• Trigger Actuated Target Pinpointing
• Double Filter Discrimination Modes For Searching In Trashy Areas
• Ground Cancellation - Trigger Actuated FASTGRAB™ Instant Ground Cancellation
• Manual Ground Cancellation Option
• Continuous Ground Monitor - Ground Mineralization Bar Graph Readout
• Waterproof 11-inch Open Frame Bi-Axial™ Search Coil
• Great for Highly Mineralized Soils.
• Renowned Target Separation Capability
• Super Sensitive - Detect Coins to 15 Inches and more
• Low Operating Cost - More than 40 hrs with 4-AA Batteries

The device includes the following functionality:

A state of the art touch screen display and wireless bluetooth communication between the main unit and probe are only some of the innovative features. This device combines different high-end detection technologies in an extremely small, lightweight and compact easy to handle unit. The telescopic probe makes it easily transportable and rugged enough and suitable for nearly all terrains.

The operating mode 'Live Sound', which uses the VLF metal detector option to scan for metal objects like gold and silver.

The operating mode '3D Scan', which is used to scan a whole area for hidden objects like metals and caves.

The user interface of the control unit can be operated in the following languages:

The lightweight main unit with touch screen display can be mounted on the telescopic probe or carried on the wrist holder. This makes it comfortable for treasure hunters and prospectors in nearly every environment. With integrated LED lamps it is even ready for the dark.

The user interface of the 3d metal detector "Evolution" is available in many different languages.

Several settings of the ground scanner (e.g. the volume of the internal speaker) are adjustable via touch-screen.

The device "Evolution" is the best introductory model to step in into the world of 3d ground scanning. It easily combines common metal detector technology with high performance ground scanner technology.

The following technical indications are medial values. During operation small variations are quite possible.

Control unit with display

Telescopic probe

Data transmission (Bluetooth)

Computer, minimum requirements

The computer is not part of the scope of delivery. The indicated values should help you for a correct selection of a suitable computer for analysis of your measured results.

In the following table you can see the complete delivery contents and all optional accessories.
The used symbols have the following signification:

x

= x times included

= not included

= optional available, only for additional charge

Description
3D software ( "Visualizer 3D" )	1
Control unit with touch screen	1
Headphones	1
USB bluetooth dongle	1
User's manual	1
Waterproof and shock resistant Peli case	1
Wireless telescopic probe	1
Wrist holder for display	1
Mini laptop

Our 3D software is designed in that way, that even less experienced users can work with it. Often it is not sufficient to know that an hidden object has been located. For further plans to recover these objects the determination of the exact position and depth is necessary - no problem with our software.

• General description
• Screenshots

Metal treasure object shown in red color inside the Visualizer 3D software. Visualizer 3D comes in a box with all drivers and user manuals available for the software and the metal detecting system. Specific transformation functions as well as depth measurement are possible with Visualizer 3D.

Visualizer 3D is the perfect 3d software for all OKM metal detectors which support graphical scan capabilities. The newest and completely revised software version of Visualizer 3D provides improved graphics and sensational depth measurement. All deep buried metal objects and treasure finds are represented where they have been detected by OKM metal detectors: under the ground surface. The depth measurement has been adapted to the different types of soil like loam, sand, stone and many other types of ground to give accurate measuring results. Visualizer 3D is equipped with several functions no professional treasure hunter should miss. Besides the visualization of detected treasure finds in 3d graphics and the measurement of depth, position and size Visualizer 3D includes the following features: Representation as 2D and 3D graphic Depth measurement Determination of objects position Manual correction of error signals Printout, Image export for subsequent processing Variable wireframe representation Optimized live picture (only with the devices Future 2005 and Future I-160) Discrimination mode to distinguish between precious and non-precious metals as well as cavities (only with Super Sensor) Automatic measurement completion in case of missing signals Automatic correction of error signals Features to improve the graphics (e.g. interpolation, color filters) Free scalable and movable graphics as well as rotatable ground scans by 360° The software Visualizer 3D is available in several languages so that many treasure hunters, archaeologists and geologists worldwide may use it easily: Arabic Chinese German English Farsi French Greek Japanese Russian Spanish Turkish Further detailed information about our Visualizer 3D software you can find on the following website: www.visualizer3d.com

Peli cases - the case for outdoor treasure hunters

The Peli transportation cases are available in different sizes, adapted to your detection equipment. The robust and transportable cases protect your metal detecting and treasure hunting equipment.

To protect your high valuable OKM equipment in a suitable casing we deliver all our metal detecting instruments in a specially designed high quality Peli transportation case. These robust and transportable cases are a must for outdoor treasure hunters and all prospectors, who need to take their OKM metal detector on treasure expeditions in pathless territories and natural uneven surfaces. These cases are required for getting your detection equipment from point A to point B in the condition it's meant to be in: intact and functional. The size of the transportation case is adapted to your measuring instrument so that all equipments fits inside. The delivered cases protect your OKM metal detector from external shocks during transportation, contamination or water penetration. The casing offers wheels and extendable handles for easy transportation. Each metal detector case features an automatic pressure equalization valve which releases air from the interior while keeping water molecules out. The Peli case offers a gadget to fix a safety lock to prevent thievery of your equipment. Stainless steel reinforced padlock protectors add strength and extra security against cutting and theft. You can relax as Peli Cases totally protect your detecting equipment that you can not put a price on. The Peli cases offer many gadgets to secure and protect your equipment.

Mini laptop - Preconfigured computer with Visualizer 3D

Our accessories are compatible with different devices and are used to optimize the measuring process and support the analysis of the targets.

All software programs and drivers are preconfigured on the mini laptop. The mini notebook is lightweight and portable. So all measurement results can be analyzed and evaluated on-site.

The mini laptop is very suitable for outdoors use due to its little weight of not even 1 kg and the strong battery with more than 8 hours operating time. The analysis of scanned data and the graphical analysis for hidden artefacts like gold and silver or the detection of chambers, caves or tombs is possible also in areas with difficult access, not only because of its small dimensions of 26 x 18 x 4 cm. Due to the integrated LED background lighting the mini laptop can be used without any difficulties even in bad lighting conditions like dawn, during the night or for detecting inside of caves, treasure chambers and underground grave chambers. The notebook is provided with installed operating system Windows XP, all drivers for bluetooth and software Visualizer 3D for all Rover Series detectors. The notebook is a free gift for the purchase of the following detectors: Rover C Rover C II Rover Deluxe You get the mini laptop for all Rover Series detectors with a high resolution 10,1" monitor. Besides to the already installed software, you have also easy and fast access to detailed user manuals of the metal detectors via the desktop. The treasure hunter can start detecting right away without the need of installing and configuring the 3d software or bluetooth drivers. A specially essential advantage for computer beginners! The Rover Series metal detectors for treasure hunting transfer measured data of the underground rapidly and without any data loss via a strong bluetooth transmission method to the laptop to visualize the position of caves, voids, treasure chests, tunnels, precious metals or gold and silver targets within the software Visualizer 3D. By using the notebook you have the advantage to get fast results of the measurements directly during the measurement itself or right after the bluetooth data transfer. Even without using any detecting instrument of the Rover Series, you can take advantage of the mini laptop. You have the option to purchase the mini laptop for an additional charge for all other OKM metal detectors which support visual graphical analysis!

Thanks to its strong signal structure, it can detect the coins and small objects in the deep very comfortably. Jeotech can detect the holes, tunnels, cellars, shelters and similar environments that may come up when looking for holes.

Jeotech  is a strong detector with various features that can locate and identify the targets in deep.

The metal detector eXp 4000 has many different functions especially for treasure hunters. So it has:

To ease the work with the geophysical measuring instrument eXp 4000 and the subsequently image evaluation the following functionality was integrated:

The comprehensive equipment of the metal detector eXp 4000 is only one point that makes it a unique treasure hunting unit. Every single probe was optimized for its own purpose. So you can work with the following antennas:

With a weight of only 1500 g the Earth Imager eXp 4000 is ideal for fast searching an area. The integrated color monitor is also usable for night searching. But also in the sunlight the display is very clear in contrast to a laptop.

Technical Specification:

• Power Supply: 15 Volt
• Weight: 1500 g
• 57.800 Samples per Second
• Processor: 300 MHz
• Working Memory: 128 MB SDRAM
• Data Memory: 128 MB
• Battery Run Time: 3 Hours

1. Automatic measurement and analysis
2. Simple indication of measured results as percentage

Jeotara Bionic System

In terms of electromagnetic detection systems Makro Teknoloji is the producer of the deepest detectors in the world. As a result of research and development studies which continue for long years, company developed an area detection System which perfectly meets the expectations of the consumers. This extremely advanced electromagnetic system which is named "JEOTARA BIONIC SYSTEM" and entered into the global market is the exact match for the expectations in the sector. We can define the operating principle of this system as the evaluation of the static energy taken from the body enforced with an electromagnetic system with advanced software to detect the frequencies transmitted by the target. This exclusively designed advanced system is designed fort he best user performance. Jeotara is a very effective electromagnetic sensation and detection detector. Jeotara is a perfect detector which may has its mark as an important auxiliary system which will be indispensible for the user in terms of its distance and strong sensation capability.

 Large Colour Screen and Animations while turning on

Jeoscan turns the system data and images into a feast of images with all the details in high resolution due to the large and colour screen it has. All the user has to do in order to enjoy this feast is to turn the ON/OFF switch from "off" to "LCD". After it is switched to LCD, the animated images are formed on the screen with a high speed. 5 seconds later, Jeoscan logo is seen on the screen. The logo remains on the screen for approximately 3 seconds.

to create a target depth report with image, the user should get the antenna close to the starting points of the target signal from four sides of the detected target and should mark the signal starts on the ground; and then should save the data relating to the width and length of the target that appears in the depth window, which appears when the depth button is pressed; the next operation when saving is done is to press the scan button, getting the search antenna up to the end of the signal over the target. At the end of the target, when the scan button is released, the relevant analysis report will be displayed on the screen in real time.

The images show some of the screen shots from the help video file in the system related to the analysis reports for various target depths and sizes and also related to how to measure the target diameters.

The images show some of the screen shots from the help video file in the system related to the analysis reports for various target depths and sizes and also related to how to measure the target diameters.

Image Reporting of Target Diameter and Depths

Jeoscan detects the diameter, size and depth of the targets in a surprisingly accurate manner and performs an operation that can is described as difficult and impossible by presenting a report with all the details and images.

Large Colour Screen and Animations while turning on

Jeohunter turns the system data and images into a feast of images with all the details in high resolution due to the large and colour screen it has. All the user has to do in order to enjoy this feast is to turn the ON/OFF switch from "off" to "LCD". After it is switched to LCD, the animated images are formed on the screen with a high speed. 5 seconds later, Jeohunter logo is seen on the screen. The logo remains on the screen for approximately 3 seconds.

Search Antenna Scan and Antenna Failure Feature

Jeohunter performs a fast and reliable data scan for possible user errors or applications left incomplete due to its high technology. For example, if the antenna socket is not fully connected to the system input at the antenna connection site, if there is lack of connection or if there is any problem such as a failure etc. in signal transmission, the system detects it immediately and informs the user about the problem as seen in the images. Otherwise, the user will carry out searches in vain with a detector that is not operable, which the user thinks is operable and sending signals, and more importantly the user will be unable to detect any targets that are actually in that zone or area and will maybe even lose the chance of the biggest finding of his life. Thus, it is beyond dispute that such an alarm system is vital in this respect.